GeoVision is a well-known manufacturer of video surveillance systems, including network cameras, digital video recorders (DVRs), and video management software. When setting up a GeoVision device for the first time, you will typically need to access it using default network settings provided by the manufacturer. These default settings include the IP address, username, password, and port number. Familiarity with these defaults is crucial for initial setup, troubleshooting, and securing your surveillance network.
In this article, we will discuss the default IP address, username, password, and port for GeoVision devices, providing a clear guide for users during installation and configuration.
Default IP Address
The default IP address is the network identifier that allows you to connect to your GeoVision device. This IP address is crucial for accessing the device’s web interface or software management tools. For most GeoVision devices, the default IP address is:
Default IP Address: 192.168.0.10
This IP address falls within the private IP address range (192.168.x.x) used in local area networks (LANs). To connect to the device, ensure your computer is configured with an IP address within the same subnet (e.g., 192.168.0.x). This allows you to access the device directly through a web browser or GeoVision's configuration software.
Default Username
The default username is required to log in to the GeoVision device’s web interface or software. This username is pre-set by the manufacturer and provides administrative access to the device. The default username for GeoVision devices is:
Default Username: admin
This username is case-sensitive and should be entered exactly as shown. The "admin" account has full administrative rights, enabling you to configure device settings, manage user accounts, and perform firmware updates.
Default Password
Along with the default username, the default password is required for logging into the GeoVision device. Initially, the device is configured with a simple password to facilitate the first-time setup. The default password for GeoVision devices is:
Default Password: admin
Similar to the default username, the default password is also "admin." This simplicity is intended for ease of access during the initial configuration but poses a security risk if not changed immediately. After gaining access to the device for the first time, it is strongly recommended that you change the password to a more secure and unique one. This helps protect the device from unauthorized access.
Default Port
The default port is the network port through which the GeoVision device communicates over the network. This port is used to access the device’s web interface and stream video data. The default port for GeoVision devices is:
Default Port: 80
Port 80 is the standard port used for HTTP traffic, making it the default for accessing the device's web interface. When connecting to the device via a web browser, you typically enter the IP address followed by ":80" (e.g., http://192.168.0.10:80), though most browsers will automatically use port 80 if no specific port number is specified.
Understanding the default settings for GeoVision devices is essential for setting up and managing your video surveillance system. The default IP address (192.168.0.10), username ("admin"), password ("admin"), and port (80) serve as the initial access points to your device. However, for security reasons, it's crucial to change the default password immediately after the initial setup. This helps safeguard your system against unauthorized access and ensures the continued security and reliability of your surveillance network.
