Everfocus is a trusted manufacturer in the video surveillance industry, known for producing a range of security cameras and recording systems. Their cameras are widely used in both commercial and residential settings for reliable monitoring. Like many security cameras, Everfocus devices come with default login credentials and network configurations, which make the initial setup easier for users and installers. If you're installing or troubleshooting an Everfocus camera, it’s important to know the default IP address, username, and password to gain access to the camera’s settings. This guide provides all the details you need for logging in and configuring an Everfocus camera for the first time.
Default IP Address
Most Everfocus cameras come pre-configured with a default IP address, which allows you to connect to the camera through a web browser or configuration tool. Typically, Everfocus cameras use a static IP address in a private range, but the camera might also be set to obtain an IP address automatically through DHCP if connected to a network with a router.
Default IP Address: 192.168.0.250
To access the camera's web interface, connect your computer to the same network as the camera, then type the default IP address into your browser's address bar. Ensure that your computer is configured with an IP address in the same 192.168.0.x subnet (such as 192.168.0.100) so it can communicate with the camera. If DHCP is enabled on your network, the camera might receive a different IP address; you can use network scanning tools to locate it if needed.
Default Username
Once you have successfully connected to the camera using its IP address, you will be prompted to log in. Everfocus cameras come with a default username that is typically assigned to the administrator account.
Default Username: admin
This default username is standard for most models and grants access to all camera settings, including video configuration, network settings, and firmware updates.
Default Password
The default password for Everfocus cameras is designed to be simple, allowing easy access during the first-time setup. However, after the initial login, it is highly recommended to change the password for security reasons.
Default Password: admin
Using the default credentials, you will have full access to the camera’s web interface and settings. It’s crucial to update the default password immediately to protect the camera from unauthorized access, especially if it's being used in a professional or sensitive security environment.
FAQ
- First, ensure that your computer is in the same IP range (192.168.0.x) by adjusting your network settings.
- If the camera is set to use DHCP, it may have been assigned a different IP address. You can use a network scanning tool like Angry IP Scanner or a dedicated software tool from Everfocus to detect the camera’s current IP address.
- Check the physical connections to ensure the camera is properly powered and connected to the network.
Setting up an Everfocus camera is straightforward when you know the default IP address, username, and password. These credentials help you access the camera’s web interface for the first-time setup and configuration. Remember to change the default settings to enhance security and prevent unauthorized access. If you encounter any issues or forget your custom credentials, resetting the camera to factory defaults will restore the default login settings.
