Dahua Technology is a well-known provider of video surveillance equipment. One of the features of Dahua cameras is the ability to stream live video using the Real-Time Streaming Protocol (RTSP). RTSP allows users to access live video feeds from their cameras over the internet or a local network. This article will explain which Dahua cameras support RTSP, the link format used, the default password, the port needed, and how to set up an RTSP stream on a Dahua camera.
Which Dahua cameras support RTSP?
Most Dahua cameras support RTSP, including both IP cameras and Network Video Recorders (NVRs). Generally, any modern Dahua camera that supports network functionality will have RTSP capabilities. This includes popular models like the Dahua IPC-HFWxxx series, IPC-HDBWxxx series, and NVRs such as the NVR52xx series.
What link does Dahua camera use for RTSP?
The RTSP link format for Dahua cameras typically follows this pattern:
rtsp://username:password@camera_ip:port/cam/realmonitor?channel=channel_number&subtype=stream_type
- username: The username used to log into the camera.
- password: The password used to log into the camera.
- camera_ip: The IP address of the camera.
- port: The RTSP port (default is 554).
- channel_number: The specific channel to stream (usually 1).
- stream_type: The stream type (0 for the main stream, 1 for the sub-stream).
For example, if your camera's IP address is 192.168.1.100, the username is "admin", the password is "admin", and you want to access the main stream on channel 1, the link would be:
rtsp://admin:[email protected]:554/cam/realmonitor?channel=1&subtype=0
What is the default password for Dahua camera RTSP?
The default username and password for Dahua cameras are typically admin for both. However, for security reasons, it is recommended to change the default password after the initial setup.
What port does Dahua camera use for RTSP?
The default port for RTSP on Dahua cameras is 554. This is a standard port for RTSP streams. However, users can change this port in the camera settings if needed. If the port is changed, it should be updated in the RTSP link accordingly.
How do I setup RTSP stream on the Dahua camera?
Setting up an RTSP stream on a Dahua camera involves a few simple steps:
- Access the camera's web interface: Open a web browser and enter the camera's IP address. Log in with your username and password.
- Go to the Configuration tab: Once logged in, navigate to the "Setup" tab at the top of the page.
- Network settings: In the Setup menu, select "Network" and then "Port".
- Enable RTSP: Ensure that RTSP is enabled. You can also see and change the RTSP port here if necessary.
- Obtain the RTSP link: Go to the "Camera" section under "Setup". Select the stream type you want to use (e.g., Main Stream). Note down the link pattern provided or construct your link based on the pattern explained earlier.
- Test the RTSP stream: Open a media player that supports RTSP, such as VLC Media Player. Go to "Media" > "Open Network Stream" and enter the RTSP link. Click "Play" to view the live stream.
By following these steps, you can easily set up and access an RTSP stream from your Dahua camera, allowing you to view live video feeds from anywhere with an internet connection.
