Avigilon is a prominent manufacturer of high-definition surveillance solutions. Their security cameras and network video recorders (NVRs) are known for their quality, scalability, and integration capabilities. When setting up Avigilon devices, you may need to configure them through a direct connection or network. For this, knowing the default IP address, username, password, and port is crucial. This guide will walk you through these default settings and explain how to access your Avigilon devices efficiently.
Default IP
The default IP address is essential for accessing any networked device, including Avigilon cameras and NVRs. When you connect an Avigilon device directly to your network, it may come with a pre-configured IP address or use DHCP (Dynamic Host Configuration Protocol) to obtain one automatically from the network's router. However, if DHCP is not available or you want to configure the device manually, you'll need to know the default IP.
Avigilon Camera Default IP:
Avigilon cameras generally do not have a fixed default IP address. Instead, they are configured to obtain an IP address automatically via DHCP. If the DHCP server is not present, the camera may default to a self-assigned IP in the 169.254.x.x range.
Avigilon NVR Default IP:
Like the cameras, Avigilon NVRs are typically set to obtain an IP address through DHCP by default. If DHCP is not available, you may need to use Avigilon's software tools (like Avigilon Control Center) to discover and assign an IP address manually.
Default Username
To access the Avigilon device's configuration settings via its web interface or software, you'll need to log in using a username. The default username is the same across most Avigilon devices.
The default username for Avigilon devices is usually admin. This is a standard username across many security systems, providing initial administrative access to the device.
Default Password
Along with the username, the default password is required to log in to the Avigilon device for the first time. Maintaining the default password can be a significant security risk, so it's crucial to change it after the initial setup.
For many Avigilon devices, the default password is admin or sometimes password. However, it's important to note that newer devices may prompt you to set a new password during the initial setup to enhance security.
Default Port
Network ports are critical for establishing communication between devices and their management software. Avigilon devices use specific default ports to facilitate connections for video streaming, management, and other functions.
Default Port:
- HTTP Port: The default HTTP port for Avigilon devices is typically
80. This port is used for accessing the web interface of the device. - HTTPS Port: If secure communication is required, the default HTTPS port is
443. - RTSP Port: For real-time streaming protocol, which is used for video streaming, the default port is
554. - Custom Ports: Some advanced configurations may involve custom ports, but these are the defaults that are commonly used.
Understanding the default IP address, username, password, and port of Avigilon devices is vital for setting up and managing your surveillance system effectively. While these defaults can get you started, changing them as part of your security protocol is strongly recommended to protect your system from unauthorized access. Whether you're configuring a single camera or an entire network of devices, these default settings are your starting point for a secure and efficient installation.
